PROTW LUX SEALER 1L

PROTW LUX

High-performance, solvent-based, and fast-drying stain-proof treatment for natural stone, terracotta and agglomerate marbles.

PROTW LUX is a protective, fast-drying, stain-proof treatment, specifically developed to give top-ranking, lasting protection against stains to natural stone and all materials requiring it. PROTW LUX is quick and easy to apply; it forms no surface film and therefore, it does not change the original breathability of the treated surface.

PROTW LUX is a neutral product that will not change the colour of the materials to which it is applied, but in some cases, it will bring out the colour of surfaces that are more sensitive to changes in tone, due to absorption. It is resistant to UV rays, will not yellow over time and is suitable for use on indoor and outdoor surfaces.

PROTW LUX is also certified for use with foods and therefore, it can be used to apply stain-proof treatment to kitchen worktops. PROTW LUX can also be used as a surface stainproof treatment in conjunction with a high penetrant water-repellent primer.

CHARACTERISTICS AND BENEFITS

1. Protects material against dirt and staining
2. Adds a high degree of hydro-oleo repellency to the treated surface
3. Resistant to UV rays
4. Will not yellow over time
5. Resistant to the elements
6. Certified for food use

USES
This product can be used on both indoor and outdoor surfaces.
Suitable for use on: Marble, Sandstone, Granite, Limestone, Slate, Basaltina, Quarzite, Porphyry,
Travertine, Cotto, Terracotta, Marble-cement agglomerate, Marble-resin agglomerate, Quartzresin agglomerate.

COVERAGE
10/15 m2/l

APPLICATION EQUIPMENT
Brush, Lambswool applicator, Roller, Cloth

APPLICATION STEPS
Preparing and cleaning the surface
1. Carefully clean the surface, making sure to remove any dust or dirt present.
2. Never apply the product to wet or damp surfaces
3. Apply PROTW LUX to surfaces with a temperature of between +5 and +40°C
4. Any adjacent surfaces not being treated with the product must be protected.
Application
5. Apply an even, thin coat of product to a clean, dry surface with the preferred tool, making
sure to create an even layer to cover the whole surface being treated
6. The product is fast drying and usually does not create residues. When applied to a compact surface that is not very absorbent, it could leave slight residues on the surface that can be easily wiped off with a clean, dry cloth. In case of very absorbent surfaces, we recommend applying a second coat of product, no less than 45 minutes after the first.

Drying time
The product is fast drying and in any case, within 45 minutes from application.

Opening to floor traffic
The surface can be opened to floor traffic about 2-3 hours after the product has been applied.

COMPLEMENTARY CLEANING AND MAINTENANCE PRODUCTS
- For routine cleaning of a surface treated with PRO TW LUX, we recommend: NEUGEL or ALGAFLOOR
- For extraordinary cleaning of a surface treated with PRO TW LUX, we recommend: FABER 30 or DETERFUG, according to the type of stone to be cleaned

To view our wet and dry vacuums click here