B1/700 Stainproof Tile Sealer- 1 litre

B1/700 Stainproof Tile Sealer

B1/700 is a protective, solvent-based, stain-proof, tile sealer treatment that is fast drying and specifically formulated to not alter the appearance of the materials on which it is applied in any way, leaving the surface with high stain-proof performance. The product is particularly recommended on all surfaces that are sensitive to colour changes following the application of an impregnating agent.

Due to these characteristics, B1 700 is a great solution for treating natural stone, such as limestone, which are generally difficult to protect due to changes in colour. It's quick and easy to apply, it doesn't create any film and therefore, it does not change the original breathability of the treated surface. It's UV resistant, it won't end up yellowing over time and is suitable for use indoors and outdoors. 

Suitable for:

CHARACTERISTICS AND BENEFITS OF B1/700

✓ Suitable for materials that suffer from colour changes.
✓ Great stain-proof properties
✓ Provides water repellency to the surface
✓ Provides oleo-repellency to the surface
✓ Extremely fast drying
✓ Will not change the color of the material
✓ Protects material against dirt and staining
✓ Resistant to UV rays
✓ Will not yellow over time

USES

This product can be used on both indoor and outdoor surfaces.
Suitable for use on: Marble, Sandstone, Limestone, Granite, Slate, Basaltina, Quartzite, Porphyry, Travertine, Cotto, Terracotta, Marble-concrete agglomerate, Marble-resin agglomerate, Quartz-resin agglomerate.

COVERAGE

10/15 m2/l

APPLICATION EQUIPMENT

Brush, Lambswool applicator, Roller, Cloth

APPLICATION STEPS

Preparing and cleaning the surface
• Carefully clean the surface, making sure to remove any dust or dirt present.
• Never apply B1 700 to wet or damp surfaces.
• Apply B1 700 to surfaces with a temperature of between +5 and +40°C
• Any surfaces on the premises not being treated with the product must be protected

Application
• Apply an even, thin coat of product to a clean, dry surface with the preferred tool, making sure to create an even layer to cover the whole surface being treated
• The product is extremely fast drying and leaves no particular residues. If there are any slight residues on the surface, these can be easily wiped off with a clean, dry cloth. In case of very absorbent surfaces, we recommend applying a second coat of product, to be applied no less than 30 minutes after the first.

Drying Time
The product is very fast drying and in any case, dries within 30 minutes from application.
Opening to floor traffic
The surface can be opened to floor traffic about 2-3 hours after the product has been applied.

COMPLEMENTARY CLEANING AND MAINTENANCE PRODUCTS
For the daily maintenance of a surface treated with B1/700, we recommend: NEUGEL or ALGAFLOOR
For extraordinary cleaning of a surface treated with B1 700, we recommend: FABER 30 or DETERFUG, according to the type of stone to be cleaned

INSTRUCTIONS AND GUIDELINES
• Never apply the product to wet surfaces.
• If the product is applied as a stain-proof treatment on a material that has already been primed with a high penetrating water-repellent, wait for this to dry completely before applying B1 700
• Do not apply the product to overly heated surfaces.
• Do not apply the product when there is an imminent risk of rain or frost, or in presence of mist, fog, or high levels of humidity.
• Apply the product to surfaces with a temperature of between +5 and +35°C
• When applying to recently laid or grouted surfaces, wait for the adhesive or grout to cure completely.
• Before applying the product to the whole surface, it is advisable to test a small, unexposed area or unused piece to check its suitability for use.

EQUIPMENT CLEANING
At the end of the application, the equipment used can be washed using white spirit.

SAFETY
When applying the product, always use suitable personal protective equipment and follow the product safety data sheet instructions with care.