€16.48 incl. VAT
NO MAC GEL is a water-based stain remover to be used to extract and remove coloured stains from all types of surface With its innovative formulation, the product can offer effective, definitive action on:
- Coffee stains, wine, tea, coca-cola, tomato, and food and drink in general;
- Stains from marker pens and ink;
- Mould, algae and the spread of plants and residues in general, such as stains from leaves, grass and clippings.
NO MAC GEL is a product that can be applied on all surfaces - even the most delicate types such as polished marbles and acid-sensitive finishes - without attacking them or causing them to lose their shine. The special gel formula of NO MAC GEL boosts its stain-extracting action, guaranteeing improved efficiency in terms of stain removal. It is also easy to use and effective on vertical surfaces.
Once applied over the stain to be removed, the product works alone without needing any further processes, until it completely removes the stain. NO MAC GEL is quick and easy to apply, and its use will not alter the surface’s original appearance.
Suitable for:
Agglomerate cement-marble
Agglomerate resin-marble
Agglomerate resin-quartz
Slate
Sandstone
Basaltina - Lava Stone
Molted basalt
Cement tile
Concrete
Ceramic Craquele'
Ceramic Glazed
Clinker
Cotto
Granite
Porcelain
Limestone
Marble
Brick facings
Manufactured Stone (Eco-stone)
Porphyry
Quartzite
Terracotta
Travertine
Tuff
Brush, Spatula, Direct application
• Carefully clean the surface, making sure to remove any dust or dirt present.
• Do not apply NO MAC GEL to overly heated surfaces. We recommend applying the product during the coolest periods of the day.
• If the surface to be treated has been waxed, proceed to remove it with Double Stripping.
NO MAC GEL must only be used alone. NEVER mix it with other chemicals.
• The product is ready to use. Pour the product straight onto the surface being treated making sure to cover the stain completely. When used on particularly large surfaces, such as when removing mold and algae from floors, the product can be applied and worked with a mechanical polisher.
• Let the product act on the surface until the stain has been completely extracted. The time required will depend on the intensity of the stain, its depth, stubbornness, and the amount of time it has been there.
Generally, the time required to extract the stain can be summed up as follows:
- Coffee stains, wine, tea, soda, tomato sauce: from 30 minutes to 2 hours.
- Stains from marker pens and ink: from 30 minutes to 3 hours
- Mould, algae, and plants and residues in general: from 15 minutes to 1 hour
• Once the time has passed, proceed to remove the product and its residues. To remove NO MAC GEL use paper towels or cloths to soak up and remove residues until the surface is completely clean.
• Wipe the surface with a slightly damp cloth and wait for it to dry before assessing the stain removal results.
• In case of medium to large surfaces, remove all residues - wet or dry - with a broom or a wet vacuum, until all excesses have been eliminated. Wipe the surface with a slightly damp cloth and wait for it to dry before assessing the stain removal results.
• If the finished result is not satisfactory, repeat the application, or decide on the need to sand the surface beforehand. If the stain is mixed in origin, it may be a good idea also to use another type of stain remover.
• When treating particularly absorbent surfaces to prevent too much product from being absorbed by the material, wet the surface with a little water before applying NO MAC GEL.
• When working to remove more complex, deeper stains from natural stone, it may be necessary to pass over the surface with a mechanical polisher to increase the surface absorption and therefore, the penetration of the stain remover, for more effective results.
• For very deep stains, you may need to work with lower grain sizes. This preliminary operation will achieve a much deeper extraction in far less time.
After rinsing the surface with water, wait for the floor to dry completely before opening to foot traffic.
NO MAC GEL must only be used alone.
NEVER mix it with other chemicals, except for Faber Poultice thickening powder
• Do not apply the product to overly heated surfaces.
• Do not apply the product when there is an imminent risk of rain or frost, or in the presence of mist.
• While applying the product the surface must not be exposed to direct sunlight.
• Apply the product to surfaces at temperatures of between +5 and +40°C
• When using on recently laid or grouted surfaces, wait for the grout to cure completely.
• To achieve an even result we recommend applying the stain remover by treating areas that are larger than the single stained portions, such as a whole tile or room. This area can be decided according to the size and spread of the stain.
• It’s always recommended to take a preliminary test to evaluate the suitability of the product.
On Backorder - 2 Week Delay
