extractor

Extractor Universal Stain Remover

51.91 incl. VAT

extractor

Only 4 left in stock

Purchase & earn 156 points!

Extractor Universal Stain remover

EXTRACTOR is a stain-cleaner in powder to mix with water before use. The product was developed to extract coloured stains and dampness stains from any type of support, even vertical surfaces. The product, thanks to its special formulation, is very effective against any type of stain, though very delicate on surfaces, even the most sensitive, such as the polished marbles.

EXTRACTOR  stain remover is characterized by an effective and fast stain-cleaning capacity and its use is extremely easy. Mixed in the right proportions, EXTRACTOR has a dense texture allowing a better performance against the staining agents. Use does not affect the final look of material.

Suitable for:

Agglomerate cement-marble

Agglomerate resin-marble

Agglomerate resin-quartz

Slate

Sandstone

Basaltina - Lava Stone

Molted basalt

Cement tile

Concrete

Ceramic Craquele'

Ceramic Glazed

Clinker

Cotto

Grout joints Cementicious

Granite

Porcelain

Limestone

Marble

Brick facings

Manufactured Stone (Eco-stone)

Porphyry

Quartzite

Terracotta

Travertine

Tuff

FABER POULTICE is a thickening powder to be used use with Faber stain removers. It adds consistency for a better grip on vertical applications. It is inert to the substances contained in the Faber stain removers with which it can be used.
A stain remover with the addition of FABER POULTICE will have a much thicker consistency for a much longer contact time with stains compared to what is possible when using the same product in its liquid form. This boosts the efficiency of the whole stain removal process.

FABER POULTICE is normally used together with OXIDANT and NO RUG products, but that can also be used with many stain removers in the Faber range.

CHARACTERISTICS AND BENEFITS

✓ Top-level thickening power
✓ Suitable for use with all Faber stain removers
✓ Increases contact time between stain and stain remover
✓ Will not alter the characteristics and properties of stain removers.

USES

Refer to the datasheet of the stain remover you intend to thicken with Faber Poultice

COVERAGE

300-400 grams per litre of stain remover for use on horizontal surfaces
400-500 grams per litre of stain remover for use on vertical surfaces

APPLICATION EQUIPMENT

Spatula

APPLICATION STEPS

Preparing and clean the surface
Refer to the datasheet of the stain remover you intend to thicken with Faber Poultice

Mixing

Pour the stain remover into a bucket or sufficiently large container and then gradually add the correct amount of FABER POULTICE. Use a spatula or other suitable instrument to mix. Continue to stir gently until the mix is even and free from lumps.
Application Refer to the datasheet of the stain remover you intend to thicken with Faber Poultice

Faber YouTube

Download Documents

What about these products?

Be the first to get tips, advice and special deals.
0
    0
    Cart
    Your cart is emptyReturn to Shop