Faber Epoxy Residue Remover

Epoxy Residue Remover - 1 Litre

37.88 incl. VAT

Faber Epoxy Residue Remover

Only 4 left in stock

Epoxy Residue Remover 1kg

EPOXY RESIDUE REMOVER is an alkaline-based cleaner specifically developed to remove residues and films from grouting and sealing operations carried out using seals or epoxy-based products, quickly and easily. The product can be used for end-of-installation cleaning as well as to remove film or stains caused through incorrect or lack of cleaning once installation has been finished. EPOXY RESIDUE REMOVER is also extremely effective on epoxy residues that have been there for some time.

EPOXY RESIDUE REMOVER acts quickly and easily, even when used on surfaces that are particularly difficult to clean, such as low-thickness materials or those with a micro-textured surface finish. Its mild but effective formula makes it ideal for use on acid-sensitive surfaces since it will not cause corrosion or aggression. EPOXY RESIDUE REMOVER is also particularly effective for the removal of synthetic residues, even if stubborn and have been there for some time, such as graffiti, paint and enamels.

Suitable for:

Agglomerate cement-marble

Agglomerate resin-marble

Agglomerate resin-quartz

Slate

Sandstone

Basaltina - Lava Stone

Molted basalt

Cement tile

Concrete

Clinker

Cotto

Granite

Porcelain

Limestone

Marble

Manufactured Stone (Eco-stone)

Porphyry

Quartzite

Terracotta

Travertine

Tuff

BENEFITS

✓ Excellent power to break down residues and epoxy patinas
✓ Top-level cleaning power
✓ Quick and easy application

USES

This product can be used on both indoor and outdoor surfaces.
Suitable for use on Marble-cement agglomerate, Marble-resin agglomerate, Marble-quartz agglomerate, Slate, Sandstone, Basaltina - Lava stone, Concrete Tiles, Concrete, Glazed ceramics, Clinker, Cotto, Granite, Polished porcelain tiles, Natural porcelain tiles, Textured porcelain tiles, Limestone, Marble, Reconstituted stone (Eco stone), Porphyry, Quarzite, Terracotta, Travertine, Tuff

APPLICATION EQUIPMENT

Cloth, mop, single-disc machine

APPLICATION STEPS

Preparing and cleaning the surface

• Before proceeding to clean the surface with Epoxy Residue Remover, it is advisable to remove dust and debris using a broom or a vacuum cleaner.
• We recommend treating small areas of the surface at a time. The size of the area to be treated individually should be decided according to the absorption level of the material.
• When applying to highly absorbent surfaces, such as Cotto or terracotta, it is necessary to work on an area of no more than about 4-5 square meters at a time.
• When applying to low-absorption surfaces, such as stoneware or ceramic tiles, the treated area may be larger, according to the requirements and the capability of the operator.

Application

• This product is ready to use
• Apply the product to the surface, covering the whole area being cleaned and distributing it evenly and vigorously with a single-disc machine or large brush.
• Let the product work for about 10-15 minutes for soft residues, and 20-30 minutes in case of stubborn or aged residues. Brush with a single disk machine now and then to enhance the extractive action of the product.
• When applied to particularly absorbent surfaces, while working with the product, it may be necessary to pour some more onto the surface, to compensate for the product absorbed by the material.
• This can be done using a more or less abrasive pad or brush, to be selected according to the type of material and the type of dirt or treatment being removed. White pad: for less dirty or more compact surfaces, such as glazed ceramics, for example. Green or light blue pad for rough, unpolished surfaces such as Cotto and terracotta.
• Once the action time has passed, remove the cleaning residues by pouring a sufficient amount of clean water onto the surface to form an emulsion with the solution on the floor; distribute this evenly with the single-disc machine or brush, and then remove any excess with a wet vacuum.
• After removing the residues, rinse the surface thoroughly using clean water. If the results are not completely satisfying, repeat the operation, following the steps above.
Opening to floor traffic
After rinsing the surface with water, the floor can be opened for use as soon as it is dry. When applying the treatment again, it is necessary to wait for the surface to be completely dry.

INSTRUCTIONS AND GUIDELINES

• It is recommended to take a preliminary test on a small unexposed area or unused piece of material to check the product's suitability.
• When applying to recently laid or grouted surfaces, wait for the adhesive or grout to cure completely.
• Do not mix with other chemical compounds
• If the finished result is not satisfactory, repeat the process as described above.

Browse our tile care range by clicking here

Watch to discover more

Download Documents

What about these products?

Be the first to get tips, advice and special deals.
0
    0
    Cart
    Your cart is emptyReturn to Shop