Acid-side rinse to neutralise high alkaline detergents
ACID RINSE Stabillses possible unstable dyes typically used in oriental rugs as well as metallic dyes and other vulnerable dyes.
Leaves fibres soft and safe where ever colour bleeding might be a problem.
Use following high pH detergents if used on wool or dyed fibres or as acid pre-spray before applying carpet protectors.
UNIT SIZE: 3.8L Bottle
PH: 2.5 – 3.5
QUANTITY: Four 3.8L Bottles
Neutralises and removes damaging alkaline residues and soil. Inhibits browning and dye bleeds.
Improves the hand of most carpets, rugs, and upholstery.
For professional use only.
Keep out of reach of children.
Read directions and cautions before use.
Before application, pretest for colourfastness in an inconspicuous area.
For Carpet and Wet-Cleanable Upholstery: Pretest in an inconspicuous area. Do not mix with alkaline detergents.
Dilution for Truckmount: Mix 946 mL per 18.9 L of water. Set chemical injection flow meter at 7.6 L per hour,extract.
Dilution for Spray/Acid Rinse: Mix 30 mL per 3.8 L of water. Apply 3.8 L ready-to-use per 20 – 50 sq. m. depending on the pile density. Vacuum extract or rake into carpet
CAUTION: Wear suitable gloves and eye protection. Use product only in well-ventilated area. To avoid skin irritation or slip hazards, do not walk on wet carpets with bare feet.
NOTICE: Product must be stored at room temperature (15°C – 30°C). Keep in sealed container when not in use. Product is not warranted if used for
repack, improperly stored, or used in a manner not consistent with manufacturer’s instructions.
Only logged in customers who have purchased this product may leave a review.